Digital Height Control²™
![](images/dhc/10-01-DHC-Cutting_Bent_Wshr_.jpg)
![](images/dhc/10-02-DHC-Cutting_Tredplate_.jpg)
PlasmaCAM's™ state-of-the-art Digital Height Control²™ gives you optimum cutting performance.
Why Digital Height Control²™ is Essential
- High quality plasma cuts are achieved by controlling the height of the torch with arc voltage feedback. The cutting tip hovers a precise distance above the metal, moving up and down to follow variations in the sheet.
- The material is automatically sensed before each cut to set the exact pierce height.
- The system knows when it's crossing an existing kerf or when the cut speed slows down, and it automatically keeps the height control from reacting and diving into the material.
- The torch raises and lowers between cuts to avoid obstacles. Tip hangup and collistions are further minimized due to the material sensing and careful control of torch height.
- At the start of each cut, the system waits until plasma cutting is detected before beginning motion (instead of just waiting for a set time delay). It also stops motion if plasma cutting unexpectedly terminates. This means more consistent, automated cutting.
- The careful control of the torch height greatly extends cutting tip life.
- All height control functions are integrated and controlled by the PlasmaCAM DesignEdge™ software - providing automated operation that is easy to adjust.
![](images/dhc/10-03-DHC-Cutting_Perf_Metal_.jpg)
![](images/dhc/10-04-DHC-Cutting_Over_a_Cut.jpg)